CADHP1 Day 11

CADHP1 Day 11            28.09.2015

Today I'm working in 3Ds Max. I've imported my scene using Linked,  considering the fact that my bar whas in the beginning to small. So now if I will see that something is wrong in Max I can just apply changes and reload the whole scene without losing anything.


This is how it looked without any materials (ok, maybe i added one grey generic one, because it's all black when you import a scene)

Then I started to add materials and it looking quite nice.

In the meantime I made to layouts :)

CADHP1 Day 10

CADHP1 Day 10         25.09.2015

Canopy ready:

Second repport sent.

And my scene is ready :)
Took a lot of work. More hours than expected. But I did it.

I started also to work on 2D drawings. I'm making attributes, then blocks and layouts.

CADHP1 Final

This is the last day.
The last two days every program that could misbehave... did. I even lost lat week on this blog, which I realized after I submitted my report. So now older posts will appear above final day because i will now recreate them. After my assingment will be graded I will try to put everything where it was originally.



I started with this referance photo:

This is my presentation photo

2 hour render, res 2400 x 1600

And  renders from 3Ds Max, with a little help of Photoshop (1 hour render, res 1200x800)

and my video

CADHP1 Day 9

CADHP1 Day 9         24.09.2015

I dag satt jeg opp sittegruppe og siden det har jeg laget to innlegg med glass. l skapte også holdere for glass så det kan være faktisk mulig å holde den.

Today I set up seating area and next to it i've created two posts with glass. l created also holders for glass so it could be actually possible to hold it.

Jeg begynte også å jobbe med baldakin. Laget skjelettet ved hjelp Array.

I started also to work on canopy. Made skeleton by using Array.

CADHP1 Day 8

CADHP1 Day 8         23.09.2015

I dag skjønte jeg at stolene som sto ved baren ble for tett sammen. Når setter jeg dem lenger fra hverandre jeg måtte endre baren. Det ser nesten det samme som tidligere. Det er bare lengre og bredere. Og akkurat som jeg var nesten ferdig med endringene AutoCad gjorde noe rart. Programmet ble ikke lagre alle endringer, men bare halvparten av dem. Vet ikke hvordan og hvorfor, men som vanlig å gjøre det samme for andre gang tok mye mindre tid :)

Today I realized that the chairs which stood by the bar were too close together. When I set them further apart I had to change the bar. It looks almost the same as earlier. It's just longer and wider. And just as I was almost done with changes AutoCad did something strange. The program didn't save all changes but only half of them. Don't know how and why, but as usual doing the same thing  for the second time took much less time :)
 

Så jeg gjorde metall fotstøtte for baren og blomsterpotte for resepsjonen..

Then I made metal footrest for the bar and flower pot for the front desk
 

CADHP1 Day 7

CADHP1 Day 7         22.09.2015


 I dag begynne jeg å jobbe på min lenestol med et friskt øye. Hadde noen ideer hvordan å løse mitt problem. Etter litt modellering jeg kommet opp med en stol som så mye bedre enn den forrige.

Today i start to work on my armchair with a fresh eye. Had couple of ideas how to solve my problem. After a bit of modeling I come up with a chair that looked a lot better than the previous one. 

Jeg gjorde avrundinger med å skape form og flytte den gjennom path med Sweep funksjon.

 I made roundings with creating shape and move it through path with Sweep function.

Etter par justeringer min lenestol ser slik ut.

 After couple of adjustments my armchair looks like this.

 Men fortsatt var det noe galt. I baksiden av stolen var et lite gap mellom stolryggen og setet. AutoCad kunne ikke gjøre unionen mellom dem. Det var trolig til mye forskjellig geometri.
Så i mitt siste forsøk på å lage denne retten jeg laget linjer basert på tidligere lenestoler og brukte Loft funksjon og nå lenestolen ser ut som det skal.

But still there was something wrong. In the back side of the chair was a small gap between back of the chair and the seat. AutoCad couldn't make union between them. There was probably to much of different geometry.
So in my final attempt to make this right i made lines based on previous armchairs and used Loft function and now the armchair looks like it should.

CADHP1 Day 6

CADHP1 Day 6         21.09.2015

I dag jobbet jeg videre med objekter i min oppgave. I messestanden min er fire sittegrupper. Det er armstolene og litt glassbord. For å lage et bord var ganske lett oppgave. 

Today I worked on with objects in my task. In my exhibition stand are four seating areas. It's armchair and a little glass table. To create a table was fairly easy task.

Neste, jeg starte å jobbe på en lenestol. Det var ikke så lett. Først lagde jeg lenestol av primitiver men den så ganske galt ut. Sjekk det ut selv :)

Next, I start working on an armchair. It was not so easy. First I made an armchair of primitives but it looked quite wrong. Check it out yourself :)

 
Så regne jeg at jeg må ta en pause fra lenestolen og ta en ny sjanse senere. Jeg har definitivt å tenke hvordan du lager den.
Deretter begynte jeg å jobbe på fotballtabellen. Den har buede overflater som den ekte slik at ballen ikke ville fast i hjørner.
Jeg hadde ikke helt ferdig, men dette er hva jeg har for i dag.

So I figure that I have to take a break from the armchair and take another try later. I definitely have to think how to create it.
So I started to work on the football table. It has curved surfaces like the real one so the ball wouldn't stuck in corners.
I didnt quite finish it but this is what I have for today.